Search results

The influence of the number and arrangement of bolts on the tensile properties of bolted composite laminates was studied in the present study.

Based on the finite element model, the stiffness degradation method is used to simulate the damage evolution process for the failure of bolted composite laminates. Using ABAQUS finite element software combined with material failure criteria, the numerical calculation of the connection strength and failure mode of bolted composite laminates was carried out.

The results of the study show that the tensile strength of the composite laminates connected by three bolts is higher than that of the laminates connected by two bolts. And the arrangement of different bolts has a great influence on the failure strength of bolted laminates.

Bolted connection of composite laminates is a common problem in engineering practice. The effect of bolt arrangement and number on the strength of composite laminates is studied in this manuscript.

The purpose of this paper is to extend the usage of stroke gestures in manipulation tasks to make the interaction between human and robot more efficient.

In this paper, a set of stroke gestures is designed for typical manipulation tasks. A gesture recognition and parameter extraction system is proposed to exploit the information in stroke gestures drawn by the users.

The results show that the designed gesture recognition subsystem can reach a recognition accuracy of 99.00 per cent. The parameter extraction subsystem can successfully extract parameters needed for typical manipulation tasks with a success rate about 86.30 per cent. The system shows an acceptable performance in the experiments.

Using stroke gesture in manipulation tasks can make the transmission of human intentions to the robots more efficient. The proposed gesture recognition subsystem is based on convolutional neural network which is robust to different input. The parameter extraction subsystem can extract the spatial information encoded in stroke gestures.

The author designs stroke gestures for manipulation tasks which is an extension of the usage of stroke gestures. The proposed gesture recognition and parameter extraction system can make use of stroke gestures to get the type of the task and important parameters for the task simultaneously.

Due to the rapid development and innovation in the Internet-based technology, conventional banks are under pressure and have to compete with Internet-based finance. This has made banks adopt measures to improve operational efficiency and reduce input and increase output.

The authors had proposed a two-stage fairness concern efficiency model based on the classical theory of data envelopment analysis (DEA) and performed an empirical study to measure agricultural loan efficiency in the 20 major Chinese banks.

The findings of the empirical analysis are as follows: (1) peer-induced fairness concern has no impact on deposit efficiency in a centralized bank supply chain; (2) The China Merchants Bank (CMB) has the third lowest deposit efficiency; (3) monotonicity of loan efficiency with input allocation depends on a bank's ownership structure; (4) efficiency ranks are strongly affected by the fairness concern; (5) most Chinese banks show a low agricultural loan efficiency.

This paper contributes to the literature in several ways. First, to the best of the authors’ knowledge, this is the first attempt to analyze agricultural loan efficiency for a bank supply chain system with the fairness concern. This work reveals the hidden factor that restricts loan efficiency of Chinese banks. Second, the proposed fairness concern two-stage DEA model has shown good ability for full ranking. It can provide a new perspective to the classical DEA literature for ranking decision-making units (DMUs). Third, the authors have demonstrated empirical bank efficiency for the 20 major Chinese banks.

The purpose of this paper is to quantify the influence of alternating current (AC) interference on hydrogen evolution reaction of X80 steel.

The hydrogen evolution potential was obtained by cathodic potentiodynamic polarization curve. The instantaneous potential under AC interference was obtained by high-frequency acquisition with three-electrode system. Electrochemical impedance spectroscopy and Tafel polarization curves were used to study the influence mechanism of AC interference on instantaneous potential.

It was concluded that the hydrogen evolution reaction could occur on X80 steel under AC interference. There were critical AC current densities of about 100 to 200 A/m2, beyond which the cathode reaction of X80 steel changed from oxygen absorption to hydrogen evolution. Besides the pH value, the initial polarization potential EZ and impedance module of the steel/electrolyte interface under AC interference were also the factors that affected the critical AC densities in different solutions.

This research quantified the hydrogen evolution capacity of X80 steel under AC interference, which could be applied to clear the effect of AC interference on hydrogen evolution reaction.

The specific iron losses of amorphous alloy material are extremely low compared with silicon steel material. The iron losses of motors may reduce by replacing the silicon steel core with an amorphous alloy core. However, one drawback of amorphous alloy material is that the specific iron losses will increase a lot after the motor manufacturing process. This paper aims to study the influences of interlaminar insulator solidifying and annealing on amorphous alloy material. The iron losses of motors made of amorphous alloy and baseline silicon steel sheets are compared and discussed.

This paper opted for an exploratory study using the experimental analysis and loss separation methods. Two amorphous alloy cores are produced and tested. The iron losses of motors made of amorphous alloy and silicon steel sheets are calculated and compared based on the measured specific iron losses. Three wound amorphous alloy core samples are made and measured. The iron losses are separated and compared by considering the manufacturing influences.

This paper provides empirical insights about what change is brought in amorphous alloy material after manufacturing. The results have shown that, for amorphous alloy cores without the annealing process, the loss increase caused by solidifying is mainly the eddy current loss, while it is mainly the hysteresis loss component for annealed amorphous alloy cores.

This paper presents for the first time the measured results of manufactured amorphous alloy cores. This paper fulfils the need to manufacture amorphous alloy motors properly for the producers.

In recent years, the demand for oil and gas pipelines has increased rapidly. Due to the restrictions of the pipeline routing, pipelines are generally laid in parallel or in the same trench, which results in stray-current interference between the independent cathodic protection (CP) systems. The purpose of this paper is to study the interference between the long-distance parallel pipelines and to obtain the optimized operation for the CP systems.

In this study, first, the numerical model of parallel pipelines was established using the boundary element analysis software (BEASY). Second, the effects of horizontal distance between parallel pipelines, coating damage rate, soil conductivity and anode output current on the interference of parallel pipelines were studied. Finally, by varying the layout or the output currents of CP stations, an optimized operation scheme osf long-distance parallel pipelines was put forward.

Simulation results showed that with a decrease in soil conductivity or coating damage rate, the interference increased. Moreover, the interference decreased with an increase in horizontal distance between two parallel pipelines or a decrease in anode output current. It was found that there are three methods to reduce the interference between long-distance parallel pipelines: to reduce the output currents of CP stations, combined protection and to close part of the CP stations. Among them, to close part of CP stations was the optimized scheme because of the lowest operating and maintenance cost.

The optimized operation scheme proposed in this study can not only solve the interference between parallel pipelines but also provide guidance for the parallel pipelines to be built in the future. Reasonably arranging the cathodic protection stations using numerical simulation can avoid the interference in the cathodic protection systems, and reduce the construction cost.

Monolithic precast concrete frame structures have been promoted and developed in recent years. Owing to material deterioration and a weaker structural integrity, monolithic precast concrete frame structures may suffer from insufficient seismic capacity as service time increases. A typical joint of monolithic precast concrete frame structure is studied in this paper. The purpose of this paper is to perform numerical modeling of the typical joint subjected to low cyclic load at different ages and analyze the hysteretic behavior reduction with ages under common atmosphere environment.

Existing un-carbonated concrete, carbonated concrete and corroded rebar are all considered as deterioration factors for the typical joint, whose constitutive models are introduced into the finite element model to study. Moreover, time-dependent constitutive model of existing un-carbonated concrete and mechanical model of bond between precast and cast-in-place concrete are established on the basis of existing experimental data. Then, finite element method is used to investigate the seismic property reduction of the typical joint, where nonlinear springs are set to simulate bonding between precast and cast-in-place concrete.

Analyzing the results, the reduction of reaction force from skeleton curves of the joint is significant in the first 30 years of service time, and slows down after 30 years. Besides, the ductility, secant stiffness and equivalent viscous damping coefficient of the typical joint remain almost unchanged in the first decade, but decrease obviously after 10 years.

The originality of the paper consists in the following. The time-dependent constitutive model of existing un-carbonated concrete is established and used in finite element method. Besides, bonding between precast and cast-in-place concrete is considered using nonlinear springs. There is a reference value for the seismic performance assessment of existing monolithic precast concrete frame structures.

Alternating current (AC) corrosion is a type of corrosion that occurs in buried pipelines under AC stray current interference, which can increase the hydrogen embrittlement sensitivity of pipelines. However, rare research works have been conducted on the hydrogen permeability characteristics of pipeline steel under AC stray current interference. The purpose of this paper is to study hydrogen permeation behavior of X80 steel under AC stray current interference.

In this paper, the hydrogen permeation behavior of X80 steel under AC interference is studied by AC hydrogen charging experiment in a dual electrolytic cell. The relationship between hydrogen evolution rate and hydrogen permeation flux is studied using the gas collection method. The difference between AC hydrogen permeability and direct current (DC) hydrogen permeability is also discussed.

The anodic dissolution caused by AC corrosion promotes the chemical desorption reaction of the adsorbed hydrogen atoms on the surface, reducing the hydrogen atom absorption ratio by 70%. When the AC is smaller than 150░ A/m², the hydrogen permeation process is controlled by the hydrogen atom generation rate, and the hydrogen permeation flux increases with the increase in hydrogen atom generation rate. When the AC exceeds 400░ A/m², the hydrogen permeation process is controlled by the absorption ratio. The hydrogen permeation flux decreases with the decrease in the absorption ratio. Under AC interference, there is a maximum hydrogen permeation flux that linearly correlates to the H⁺ concentration in the solutions.

The high-strength steel is very sensitive to hydrogen embrittlement, and X80 steel has been widely used in oil and gas pipelines. To date, no research has been conducted on the hydrogen permeation behavior of pipeline steel under AC interference, and the hydrogen permeability characteristics of pipeline steel under AC interference are not clear. The research results of this paper are of great significance for ensuring the intrinsic safety of high-strength pipelines under AC stray current interference.

We compare environmental impacts associated with incoming foreign direct investment versus domestic capital in China. We use aggregate data on Chinese provinces’ economic and pollution indicators to explore the effects of the financial origin of fixed capital. Our simultaneous models consider three prime channels through which these effects work: economic scale, sectoral composition, and pollution intensity. Results show that emissions associated with foreign financed capital are lower than with domestically financed capital for some but not all of the considered types of pollution.

The purpose of this paper is to study some evolving mechanisms for producing weighted networks, as well as to analyze the statistical properties of the networks.

A simple one‐parameter evolution model of weighted networks is proposed, in which the topological growth combines with the variation of weights. Based on weight‐driven dynamics, the model can generate scale‐free distributions of the degree, node strength and edge weight, as confirmed in many real networks.

The exponent of the edge weight can be widely tuned. The unique parameter p controls the edge weight dynamical growth. The authors also obtain the non‐trivial weighted clustering coefficient and the weighted average to the nearest neighbors' degree.

Accessibility and availability of data are the main limitations which apply to the figures.

The new evolving networks method may be beneficial for understanding real networks.

The paper proposes a new approach of explaining the evolving mechanisms of the real networks.